Using A Web Browser To Set Security Features; Changing Security Configuration - Comtrol DeviceMaster LT User Manual

Using a Web Browser to Set Security Features

Changing Security
Configuration
DeviceMaster LT User Guide: 2000586 Rev. B
The follow procedures are discussed below:
•

Changing Security Configuration

• Changing Keys and Certificates
Use the following steps to change security settings in the DeviceMaster LT.
1. Enter the IP address of the DeviceMaster LT in the Address field of your web
browser and press the Enter key.
The Software displays as NS-Link, if you have
installed and configured a device driver.
2. Click the Security tab.
3. Click the appropriate check boxes in the Security Configuration area to enable
or disable security accordingly.
Refer to the help system or
Page 58 for detailed information.
4. After making changes to the Security Configuration area, click Save.
Using a Web Browser to Set Security Features
on Page 64
Configure/Enable Security Features Overview
DeviceMaster LT Security - 63
on