Socket Mode Serial Port Testing - Comtrol DeviceMaster LT User Manual

Socket Mode Serial Port Testing

Socket Mode Serial Port Testing

124 - Troubleshooting and Technical Support
This procedure illustrates using Putty, which is available in PortVision DX.
Optionally, you can use any other Winsock compatible application.
Note: The following procedure starts with resetting DeviceMaster LT to factory
default values. You may want to save the DeviceMaster LT socket
configuration using
1. If necessary, install PortVision DX using
and scan the network to locate the DeviceMaster LT that you want to test.
2. Right-click the DeviceMaster LT and click Webpage.
3. Scroll to the bottom of the home page and click Reboot.
4. Click the Set configuration for all ports to factory default settings option and then
click the Yes Reboot button.
Saving a SocketServer Configuration File
Installing PortVision DX
DeviceMaster LT User Guide: 2000586 Rev. B
on Page 77.
on Page 15