Comtrol DeviceMaster LT User Manual page 25

DeviceMaster LT User Guide: 2000586 Rev. B
4. Click Yes to the Upload Firmware message that warns you that this is a
sensitive process. It may take a few moments for the firmware to upload onto
the DeviceMaster LT. The DeviceMaster LT reboots itself during the upload
process.
5. Click Ok to the advisory message about waiting to use the device until the
status reads ON-LINE. In the next polling cycle, PortVision DX updates the
Device List pane and displays the new SocketServer version or right-click the
DeviceMaster LT and click Refresh.
6. If the upload fails, reset the Bootloader timeout to 60 seconds and then repeat
Steps 3 through 5. For procedures, see
Page 84.
You are now ready to continue the installation and configuration process.
• Device Driver (NS-Link) Installation
• Socket Port Configuration
Uploading SocketServer with PortVision DX
Changing the Bootloader Timeout
on Page 29
on Page 41
on
Initial Configuration - 25