Table of Contents
Advertisement
Uploading SocketServer to Multiple DeviceMaster LTs
Uploading SocketServer to Multiple DeviceMaster LTs
74 - Managing the DeviceMaster LT
You can use this procedure if your DeviceMaster LT is connected to the host PC,
laptop, or if the DeviceMaster LT resides on the local network segment.
1. If you have not done so, install PortVision DX
Page 15) and Scan the network.
2. Shift-click the multiple DeviceMaster LTs on the Main screen that you want to
update and use one of the following methods:
•
Click the Upload button.
•
Right-click and then click Advanced > Upload Firmware.
•
Click Advanced >Upload Firmware in the Manage menu.
3. Browse, click the firmware (.bin) file, Open (Please locate the new firmware),
and then click Yes (Upload Firmware).
It may take a few moments for the firmware to upload onto the DeviceMaster
LT. The DeviceMaster LT reboots itself during the upload process.
4. Click Ok to the advisory message about waiting to use the device until the
status reads ON-LINE.
In the next polling cycle, PortVision DX updates the Device List pane and displays
the new firmware version.
(Installing PortVision DX
DeviceMaster LT User Guide: 2000586 Rev. B
on
Advertisement
Table of Contents
Troubleshooting
