Testing Ports Using Port Monitor (Pmon2); Overview; Testing Comtrol Com Ports - Comtrol DeviceMaster LT User Manual

Testing Ports Using Port Monitor (PMon2)

Overview

Testing Comtrol
COM Ports
DeviceMaster LT User Guide: 2000586 Rev. B
You can use this subsection to test the DeviceMaster LT driver installation. If you
need to install the device driver, locate the
documentation.
This procedure will check whether the DeviceMaster LT can:
• Communicate through the Comtrol device driver
• Determine if a port is open with an application
If necessary, Installing PortVision DX
contains Port Monitor.
1. Start PortVision DX from the Start menu, select Programs > Comtrol >
PortVision DX > PortVision DX or click the desktop shortcut.
2. Select Tools > Applications > Port Monitor (PMon2).
3. Click Add Ports using the icon or Tools > Add Ports,

Testing Ports Using Port Monitor (PMon2)

latest driver and driver installation
on Page 15 to install PortVision DX, which
Troubleshooting and Technical Support - 115