Changing Keys And Certificates - Comtrol DeviceMaster LT User Manual

Changing Keys and Certificates

Changing Keys and
Certificates
64 - DeviceMaster LT Security
5. Make the appropriate selection for your situation:
• Click Continue, if you addition configuration and then make sure that you
reboot the DeviceMaster LT later so that the changes take affect.
• Click Reboot so that changes take affect as soon as the DeviceMaster LT
returns online.
Use the following steps to update security keys and certificates in the
DeviceMaster LT.
1. If necessary, enter the IP address of the DeviceMaster LT in the Address field
of your web browser and press the Enter key.
2. Click the Security tab.
3. Click Set for the appropriate key or certificate option in the Keys and
Certificate Management area to configure security keys and certificates.
Refer to the help system or
Page 64 for detailed information.
4. Click Browse to locate the key or certificate file, highlight the file, and click
Open.
5. Click Upload when you return to the Key and Certificate Management area.
The key or certificate notation changes from factory or none to User when the
DeviceMaster LT is secure.
6. You do not need to click Save, but changes will not take effect until the
DeviceMaster LT is rebooted.
You can reboot the DeviceMaster LT by returning to the Server Status tab
(scroll to the bottom of the page) or using PortVision DX.
Key and Certificate Management
DeviceMaster LT User Guide: 2000586 Rev. B
subsection on