Comtrol DeviceMaster LT User Manual page 83

DeviceMaster LT User Guide: 2000586 Rev. B
3. In the left pane, highlight the port for which you want to load the port-level
settings from the configuration file.
4. Click Load Configuration.
5. Browse to the location of the configuration file that you want to load.
6. Highlight the configuration file and click Open. The configuration file loads in
a few moments.
7. Make the appropriate choice for your situation:
• Click No to the ComtrolApplet message, if you are using the file to set up
multiple DeviceMaster LTs with the same port-level settings.
• Click Yes to the ComtrolApplet
message, if you are using the file
to restore a specific
DeviceMaster LT. For example,
you needed to remove and then
re-install the DeviceMaster LT
NS-Link device driver.
Loading Port Configuration
Managing the DeviceMaster LT - 83