Restoring Default Wireless Configuration System Settings; Using The Reset Button; Using A Web Browser - Comtrol DeviceMaster AIR User Manual

Restoring Default Wireless Configuration System Settings

Using the Reset
Button
Using a Web
Browser
Hardware Installation and WLAN Configuration
There are two ways to restore the default settings on the DeviceMaster AIR:
• Reset button
• Use a web browser and the Admin tab
Use the Reset Button between the antenna
and the power receptacle. Press the button
for a few moments to revert to the factory
default settings of the DeviceMaster AIR.
For a list of the defaults, see
Default Settings for the WLAN Port
Page 59.
Use your web browser to access the Admin tab to load previously saved system
settings.
1. Open the web browser and enter the DeviceMaster AIR IP address.
2. Select or type in user name in the User Name field.
3. Enter the password, if a password was configured during initial installation.
4. Select the Admin tab.
Restoring Default Wireless Configuration System Settings
Factory
on
DeviceMaster AIR User Guide: 2000365 Rev. C - 25
Reset