Accessing Socket Configuration; Web Browser; Portvision Plus; Web Manager Button - Comtrol DeviceMaster PRO Installation And Configuration Manual

Accessing Socket Configuration

Web Browser

PortVision Plus

Web Manager Button

Configure Device Page

DeviceMaster Installation and Configuration Guide: 2000506 Rev. B
There are several ways to access the socket configuration pages (SocketServer or NS-
Link). Use the method that fits your environment best.
• Web Browser
• PortVision Plus
To access the socket configuration page for the DeviceMaster using a web browser, follow
this procedure.
1. Start your web browser.
2. Enter the IP address of the DeviceMaster in the URL field.
Note: If you do not know the IP address, you can view the IP address in PortVision Plus
or retrieve the IP address with the NS-Link driver for Windows.
3. Click the port number that you want to configure as a socket.
Note: See the web page Help system, if you need information about configuring sockets or
serial tunneling. The Help system provides detailed configuration procedures and
descriptions for all fields.
There are several ways to access the socket configuration page for the DeviceMaster
using PortVision Plus.
1. If necessary, start PortVision Plus, right-click the DeviceMaster that you want to
configure, and click Web Manager.
2. Click the port for which you want to configure socket port settings (serial, TCP
connection configuration, and UDP connection configuration).
Note: For socket configuration information see the Help system. Click the ? in a
configuration area for field specific information or the Help button at the
bottom of the page to view page level help. To locate configuration procedures,
scroll to the top of the Help file and view the Table of Contents.
3. Click Save to return to the main page.
4. Optionally, access the following pages to configure additional settings.
a. Click the Network page to change the network settings.
b. Click the Email Settings page to configure email notification services.
c. Click the RFC1006 Settings page to configure RFC1006 settings.
1. If necessary, start PortVision Plus, double-click the DeviceMaster that you want to
configure in the List View pane.
2. Click the port Settings tab to configure socket port settings (serial, TCP connection
configuration, and UDP connection configuration).
Note: For socket configuration information click the Help button at the left.
3. Optionally, access the following pages to configure additional settings.
a. Click the Email Settings property page to configure email notification services.
b. Click the RFC1006 Settings property page to configure RFC1006 settings.
c. Click the Port Settings property page to configure serial port characteristics for
socket services.
Accessing Socket Configuration
Socket Port Configuration - 51