15. Removal of Back Case Unit
1. Remove the Side Case R S Unit.
2. Remove the CAMERA C.B.A..
3. Unscrew the screw (W) and open the cassette
cover.
SCREW (W),
(X) & (Y)
4mm
BLACK
4. Unscrew the screw (X) and remove the EVR
Cover.
5. Unscrew the 6 screws (Y).
SCREW (Y)
SCREW (Y)
SCREW (X)
EVR COVER
6. Disconnect a connector P1501 on VTR C.B.A..
NOTE: When the connector P1501 is connected on
SCREW (W)
7. Disconnect a connector P152 on MODE SW
8. Disconnect a connector P1501 on POWER SW
SCREW (Y)
DIS-13
VTR C.B.A., make the condition about wire
is processed as shown in figure.
C.B.A..
P152
C.B.A. and remove the Back Case Unit.
P501
P1501
BACK CASE UNIT