Notes On Safety - Fayat DYNAPAC DRP40DX Operating Instructions Manual

Checks prior to start up – Notes on safety

5.1 Notes on safety

44
If the following tests reveal damages or other defects, the machine
must not be operated, until these deficiencies have been corrected.
Do not operate the machine with defective indicators and control
elements.
Safety installations must not be removed or made ineffective.
Do not change any fixed settings.
WARNING!
Health hazard caused by fuels and lubricants!
– Safety regulations and environmental protec-
tion regulations must be followed when han-
dling fuels and lubricants
dling fuels and lubricants" on page 23.
WARNING!
Danger of injury caused by rotating parts!
– Before starting work on the machine make sure
that the engine can not be started.
1. Park the machine safely
in secured condition" on page 55.
2. Open and secure the protection hood.
3. Close the protection hood again after work is completed
Ä Chapter 8.2.1.2 „Closing the protection
hood" on page 64.
DRP40DX
Ä Chapter 3.4 „Han-
Ä Chapter 6.4 „Parking the machine