8.5 Running-in instructions
8.5.1 General
8.5.2 After 25 operating hours
Maintenance – Running-in instructions
The following maintenance work must be performed when running
in new machines or overhauled engines.
1.
Change the engine oil.
2.
Check the valve clearance, adjust if necessary
8.9.2 „Checking, adjusting the valve clearance" on page 77.
3.
Check engine and machine for leaks.
4.
Retighten the fastening screws on air filter, exhaust and other
attachments.
5.
Retighten the bolted connections on the machine.
6.
Check the V-belt
belt" on page 93.
7.
Check the oil level in the exciter shaft housing
8.11.4 „Checking the oil level in the exciter
housing" on page 94.
DRP40DX
Ä Chapter 8.11.3 „Servicing the V-
Ä Chapter
Ä Chapter
69