Table of Contents
Advertisement
Fig. 77
8.9.6 Changing the oil in the exciter housing
1
OIL
Fig. 78
Maintenance – Annually / every 250 operating hours
8.
Insert the air filter (1) carefully into the filter housing and
fasten it with the knurled nut (2).
9.
Close the cap (3).
Protective equipment:
1.
Park the machine on level ground.
2.
Park the machine safely
in secured condition" on page 55.
3.
Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4.
Tilt the machine slightly towards the oil drain side and secure
it properly.
2
5.
Unscrew the bleeding screw.
6.
Unscrew the filling/drain plug and collect any oil running out.
B-692-0013
NOTICE!
Danger of engine damage!
–
Ensure correct fit of air filter cover and
seal.
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specification
Ä Chapter 8.4 „List of fuels and lubri-
cants" on page 68.
–
Do not use low-ash engine oils for the exciter
shaft housing.
n
Working clothes
n
Safety shoes
n
Protective gloves
DRP40DX
Ä Chapter 6.4 „Parking the machine
83
Advertisement
Table of Contents
