Checking The Engine Oil Level - Fayat DYNAPAC DRP40DX Operating Instructions Manual

Checks prior to start up – Checking the engine oil level

5.3 Checking the engine oil level

Fig. 21
Fig. 22
46
NOTICE!
Danger of engine damage!
–
B-SYM-1068
Protective equipment:
1. Clean the area around the oil dipstick.
2. Pull out the dipstick and wipe it clean with a lint-free, clean
cloth.
3. Insert the dipstick and pull it out again to check the oil level.
ð The oil level must be between the "MIN" and "MAX"
marks.
4.
B-HAT-0003
If the oil level is too low, top up oil to the "MAX" mark.
5. Push the dipstick in.
DRP40DX
+Use only oil of the permitted specification
Ä Chapter 8.3.1 „Engine oil" on page 65.
n Working clothes
n Safety shoes
n Protective gloves
NOTICE!
Danger of engine damage!
– Do not fill in too much engine oil.