Replacing The Air Filter - Fayat DYNAPAC DRP40DX Operating Instructions Manual

Reversible vibratory plate
Table of Contents

Advertisement

Maintenance – Annually / every 250 operating hours
Fig. 75

8.9.5 Replacing the air filter

Fig. 76
82
4.
Pull the fuel filter out of the tank by the string.
5.
Pull the fuel hose (3) off the fuel filter (2).
6.
Take the fuel filter out of the bracket (1) and replace it with a
new one.
7.
Plug on the fuel line.
8.
Insert the fuel filter into the tank.
9.
Close the fuel tank tightly.
The fuel system is self-bleeding.
10.
Dispose of fuel and filter in an environmentally friendly way.
NOTICE!
Danger of engine damage!
Do not start the engine after having removed
the air filter.
Protective equipment:
1.
Park the machine in secured condition
„Parking the machine in secured condition" on page 55.
2.
Allow the engine to cool down.
3.
Remove the cap (3).
4.
Unscrew the knurled nut (2) and pull out the air filter (1).
5.
Clean the cover.
6.
NOTICE!
Danger of engine damage!
Prevent dirt from getting into the air
intake opening.
Do not clean the air filter housing with
compressed air.
Clean the filter housing with a clean, lint-free cloth.
7.
Replace the air filter.
DRP40DX
n
Working clothes
Protective gloves
n
Ä Chapter 6.4

Advertisement

Table of Contents
loading

Table of Contents