Esr; Idn - ITech IT-M3100D Programming Manual

Example
*ESE 16
Query command
*ESE?
Returns
NR1
See also

*ESR?

*STB?
*ESR?
This command reads the value of Standard Event Status Register (SESR). Once
this command executes, the SESR is reset. The bit definition for the SESR is the
same as the Standard Event Status Enable Register.
Syntax
*ESR?
Arguments
None
Default value
Not applicable
Example
*ESR?
Returns
NR1
See also
*CLS
*ESE
*ESE?
*OPC

*IDN?

This command reads information that identifies the power supply. It returns a
parameter that contains four segments divided by a comma. Example: ITECH,
IT-M3100D, 60234567890123456, 1.01-1.02-1.03.
Copyright © Itech Electronic Co., Ltd.
Common Commands
70