Output:delay[:On] <Nrf; Output:delay:off <Nrf - ITech IT-M3100D Programming Manual

Returns
None
OUTPut:DELay[:ON] <NRf+>
This command sets the delay time before turning the output on.
Syntax
OUTPut:DELay[:ON] <NRf+>
Parameters
<0.000-10.000>
Default value
0.000S
Example
OUTP:DEL 1.0
Query command
OUTPut:DELay[:ON]? [MINimum|MAXimum]
Returns
NR3
OUTPut:DELay:OFF <NRf+>
This command sets the delay time before turning the output off.
Syntax
OUTPut:DELay:OFF <NRf+>
Parameters
<0.000-10.000>
Default value
0.000S
Example
OUTP:DEL:OFF 1.0
Query command
OUTPut:DELay:OFF? [MINimum|MAXimum]
Copyright © Itech Electronic Co., Ltd.
Output Commands
8