[Output:]Protection:wdog:delay [Minimum|Maximum]; Output:protection:foldback[:Mode]<Cpd - ITech IT-M3100D Programming Manual

Returns
0|1
[OUTPut:]PROTection:WDOG:DELay
[MINimum|MAXimum]
This command sets the time of the communication watchdog.
Syntax

[OUTPut:]PROTection:WDOG:DELay [MINimum|MAXimum]

Parameters
<NRf+> 2.0-3600.0
Default value
2.0s
Example
PROT:WDOG:DEL 2.0
Query command
[OUTPut:]PROTection:WDOG:DELay? [MINimum|MAXimum]
Returns
NR3
OUTPut:PROTection:FOLDback[:MODE]<CPD>
This command is used to set the Foldback protection mode (OFF/CC/CV).
Syntax
OUTPut:PROTection:FOLDback[:MODE]<CPD>
Parameters
<OFF|CC|CV>
Default value
OFF
Example
OUTP:PROT:FOLD CC
Query command
OUTP:PROT:FOLD?
Copyright © Itech Electronic Co., Ltd.
Output Commands
11