Chapter 14 Common Commands; Cls; Ese - ITech IT-M3100D Programming Manual

*CLS

This command clears the error queue and the bits of the following registers:



Syntax
*CLS
Arguments
None
Default value
Not applicable
Example
*CLS
Query command
None
Returns
Not applicable

*ESE

This command sets or queries the bits in the Event Status Enable Register (ESER).
The ESER is an eight-bit register that determines which bits in the Standard Event
Status Register (SESR) will set the Event Summary Bit (ESB) in the Status Byte
Register (SBR).
Syntax
*ESE <NRf>
Arguments
0 to 255
Default value
0

Chapter 14 Common Commands

Standard Event Register
Questionable Event Register
Status byte register
Copyright © Itech Electronic Co., Ltd.
Common Commands
69