List:step:width <Nr1>,<Nrf; List:repeat <Nr1 - ITech IT-M3100D Programming Manual

Returns
NR3
LIST:STEP:WIDTh <NR1>,<NRf+>
This command sets the width value of the nth step in the list program.
Syntax
LIST:STEP:WIDTh <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
LIST:STEP:WIDT 1,1.000
Query command
LIST:STEP:WIDTh? <NR1>
Returns
NR3
LIST:REPeat <NR1>
This command sets the number of list repetitions.
Syntax
LIST:REPeat <NR1>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
LIST:REP 3
Query command
LIST:REPeat?
Copyright © Itech Electronic Co., Ltd.
List Commands
47