[Source:]Voltage:slew:positive <Nrf; [Source:]Voltage[:Over]:Protection[:Level] <Nrf - ITech IT-M3100D Programming Manual

Example
VOLT:SLEW:NEG 0.03
Query command
[SOURce:]VOLTage:SLEW:NEGative? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
This command sets the voltage rising slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
Parameters
<0.001-10.000>
Default value
0.001
Example
VOLT:SLEW:POS 0.03
Query command
[SOURce:]VOLTage:SLEW:POSitive? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]
<NRf+>
This command sets the over-voltage limit of the power supply.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel] <NRf+>
Parameters
<NRf+> MIN TO MAX
Default value
MAX
Copyright © Itech Electronic Co., Ltd.
Source Commands
23