[Source:]Voltage[:Over]:Protection:delay <Nrf; [Source:]Voltage[:Over]:Protection:state <Bool - ITech IT-M3100D Programming Manual

Example
VOLT:PROT 10.00
Query command
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection:DELay
<NRf+>
This command sets the over-voltage delay time of the power supply.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection:DELay <NRf+>
Parameters
<0.00-10.00>
Default value
10.00S
Example
VOLT:PROT:DEL 10.00
Query command
[SOURce:]VOLTage[:OVER]:PROTection:DELay? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection:STATe
<bool>
This command enables or disables the over-voltage function.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection:STATe <bool>
Parameters
0|OFF|1|ON
Copyright © Itech Electronic Co., Ltd.
Source Commands
24