[Source:]Voltage[:Level]:Triggered[:Amplitude] <Nrf; [Source:]Voltage:slew:negative <Nrf - ITech IT-M3100D Programming Manual

Example
VOLT 10.00
Query command
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]
<NRf+>
This command sets the output voltage value when the power supply receives a
trigger.
Syntax
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] <NRf+>
Parameters
<NRf+> MIN TO MAX
Default value
MIN
Example
VOLT:TRIG 10.00
Query command
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage:SLEW:NEGative <NRf+>
This command sets the voltage falling slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW:NEGative <NRf+>
Parameters
<0.001-10.000>
Default value
0.001
Copyright © Itech Electronic Co., Ltd.
Source Commands
22