[Source:]Apply <Nrf+>,<Nrf; [Source:]External[:State] <Bool - ITech IT-M3100D Programming Manual

Default value
VOLTage
Example
FUNC:PRI VOLT
Query command
[SOURce:]FUNCtion:PRIority?
Returns
VOLTage|CURRent
[SOURce:]APPLy <NRf+>,<NRf+>
This command sets voltage and current values with a single command
message.
Syntax
[SOURce:]APPLy <NRf+>,<NRf+>
Parameters
<NRf+> voltage value MIN TO MAX
<NRf+> current value MIN TO MAX
Default value
MIN,MAX
Example
APPL 10.00,3.500
Query command
[SOURce:]APPLy?
Returns
NR3,NR3
[SOURce:]EXTernal[:STATe] <bool>
This command enables or disables the external analog quantity function of the
power supply.
Syntax
[SOURce:]EXTernal[:STATe] <bool>
Copyright © Itech Electronic Co., Ltd.
Source Commands
29