Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
Figure 3-20: Static Routing
NOTE: For each field description, refer to the
CAT6/CAT15 CPE Configuration
Table 3-3: Static Routing
Field Name
Index
Enable
Destination Network
Netmask
Gateway
3.7.5 Configure the Management Server
In the BTS Setting > Management Server window, enter the NMS information (Figure 3-21). When using
the Baicells CloudCore to manage the network, in the http:// field, enter the following URL address and
port number: http://baiomc.cloudapp.net:8443/smallcell/AcsService.
If you are using Local OMC or another NMS, enter its server address and port number. Refer to the field
descriptions in Table 3-4.
Atom CAT4 CPE Configuration Guide
Guide.
Description
Auto-generated static route index number.
Enable/Disable the static route.
The destination IP address.
The subnet mask of the destination IP address.
The target IP address' gateway IP address.
30
and
Atom