Technical Support; First Steps - - Startup-Information Baseboard; Extended Support; Disclaimer & License Information - Kontron BL Pi-Tron CM3+ User Manual

Technical Support

First Steps -- - Startup-Information Baseboard
For the first startup of your board, you will find more information about the Software / BSP (demo) and additional
hardware information at the online documentation.
Please follow the link https://docs.kontron-electronics.de/sw/ked/raspberry-pi/pi-tron/cm3-docs/quickstart/
The online documentation is primarily intended for our Eval-Kit / Evalboard but will help you also to put your
BL Pi-Tron CM3+ into operation. Additionally, you will find information how to get access to the Yocto based GitLab
software repository and how to make your own software images.

Extended Support

For detailed technical support please contact:
E-mail: support@kontron-electronics.de

Make sure you have the following product identification information in your e-mail:
Product name

Product model number

Serial number (SN) of the unit

Please explain the nature of your problem in your e-mail.
The serial number can be found on the type label on the system.
Disclaimer & License Information
The demo software (BSP) available for the device contains parts which were licensed as free respectively open-
source software under the GNU General Public License, version 2 and/or 3, respectively the GNU Lesser General
Public License, versions 2.1 and/or 3.0.
You can obtain a pre-configured Raspbian Pi OS - - Pi-Tron demo image at
https://docs.kontron-electronics.de/sw/ked/raspberry-pi/pi-tron/cm3-docs/quickstart/
or contact:
Kontron Electronics GmbH
Max-Planck-Str. 6
72636 Frickenhausen
Germany
www.kontron-electronics.com
E-Mail: support@kontron-electronics.de
www.kontron-electronics.com
BL Pi-Tron CM3+ - Rev. 1.1
// 38