Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Installation
Installation Materials
Locate the following materials needed to install the ProLiant Storage System:
Installing SCSI Controllers in Servers
SCSI Controller if not already installed or integrated in your server (not
provided with the ProLiant Storage System)
Hot-pluggable Fast-Wide SCSI-2 or Fast-SCSI-2 drives (not provided
with the ProLiant Storage System)
External SCSI Cable (provided with the ProLiant Storage System):
wide SCSI to wide SCSI cable for use with Fast-Wide SCSI-2
controllers, or wide SCSI to standard SCSI adapter cable for use with
Fast-SCSI-2 controllers
AC Power Cord (provided with the ProLiant Storage System)
Network operating system drivers. For NetWare, see the README
files on the NetWare Programs from Compaq diskette for information on
software support for NetWare. All necessary drivers and software
documentation are included in the Compaq Software Support or
Compaq SmartStart kits provided with the ProLiant Storage System.
If using integrated SCSI controllers, no other installation is necessary.
Proceed to "Connecting the Server to the ProLiant Storage System" later
in this chapter.
If installing a SCSI controller option, use the instructions that came with
that option.
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant Storage System and is the answer not in the manual?
Questions and answers