Table of Contents
Advertisement
If multiple wireless networks are enabled in a frequency band, the main network is connected by
default.
To use the WPS function, the encryption mode of the wireless network must be WAP2 or not
encrypted.
5.5.5
Connect to the Wi-Fi network by entering PIN code of the
ONT on clients
This method is usually used on WiFi network adapters. Please refer to the user guide of the WiFi
network adapter for configuration details.
Configuring procedure:
Step 1
Choose WLAN > wlan (2.4GHz) > WPS on the web UI. Find and record the Self-PIN
Number of the ONT.
Step 2
Enter the PIN code on the wireless device that supports WPS connection using PIN code.
---End
Wait a moment until the WPS negotiation is completed, and the wireless device is connected to
the WiFi network.
If multiple wireless networks are enabled in a frequency band, the main network is connected by
default.
To use the WPS function, the encryption mode of the wireless network must be WAP2 or not
encrypted.
37
WLAN
Advertisement
Table of Contents
