Ems Network Management - Tenda TES70 Series User Manual

Classified by management interface: GUI mode and CLI mode
◼
Command Line Interface (CLI) mode executes various complex commands in the form
−
of strings in the CLI of the Windows system, which is mostly used for debugging and
fault diagnosis. The EMS in CLI mode does not require installation and is easy to
operate. Users only need to connect the Console port of the SWG disk to the RS232
serial port on the management computer, and manage the TES70 series devices
through HyperTerminal. The disadvantage is that various functions and configurations
need to be entered in text line by line, which is highly professional and difficult for
ordinary users to master.
Graphical User Interface (GUI) mode adopts a graphical interface, and users can click
−
the button with the mouse to operate, which is simple and intuitive. Compared with
CLI mode, the human-computer interaction of GUI mode is stronger, which is easier
for users to master. There are two types of GUI mode: EMS network management and
Web network management.
This chapter introduces the management mode of GUI network management system to TES70
series. For details, refer to the user guide for EMS network management and user guide for web
management.
4.1

EMS network management

EMS can realize the unified management of the entire series of Tenda GPON products. The system
is equipped with a concise and clear operating interface for system locking, password modification
and exit. Efficient topology management enables users to manage the domain view of network
elements (NEs), including creating domains, modifying domains, creating groups, and adding NEs.
Figure 4-1 EMS network management
17
Document version: V1.0