Tenda PON ONT HG9 User Manual page 71

Enter the user name and password in the DynDns Settings part, which are JohnDoe and
6.
JohnDoe123456 in this example.
Click Add.
7.
Step 3 Configure the port forwarding function (refer to
---End
After the configuration, users from the internet can access the FTP server by visiting "Intranet
service application layer protocol name://Domain name". If the remote port number is not the
same as the default intranet service port number, the accessing address should be: "Intranet
service application layer protocol name://Domain name:Remote port number".
In this example, the address is ftp://o2849z7222.zicp.vip.
To access the FTP server from the internet with a domain name:
Open the file explorer on a computer that can access the internet, and visit
ftp://o2849z7222.zicp.vip.
Enter the user name and password to access the resources on the FTP server.
port forwarding).
61
Services