Tenda PON ONT HG9 User Manual page 15

Table of Contents

Advertisement

HG7 & HG7c
The appearance of HG7 and HG7c is quite similar, except that HG7c does not have the TEL indicator
and port. The following figures show the appearance of HG7 as an example.
LED indicators
LED
Color
indicator
PWR
Green
PON
Green
LOS
Red
LAN
Green
2.4G/5G
Green
TEL
Green
Status
Description
Solid on
The ONT is powered on properly.
Off
The ONT is powered off or not powered on properly.
Solid on
The ONT is registered successfully.
Blinking
The registration is not completed (unregistered or registering).
The received optical power is lower than the optical receiver
Off
sensitivity, or no fiber cord is connected.
The received optical power is lower than the optical receiver
Blinking
sensitivity, or no fiber cord is connected.
Off
The received optical power is within the optical receiver sensitivity.
There is at least one LAN port connected properly, but no data is
Solid on
being transmitted over the corresponding port.
There is at least one LAN port connected properly, and data is being
Blinking
transmitted over the corresponding port.
No Ethernet device is connected or the Ethernet device is not
Off
connected to any LAN port properly.
The 2.4 GHz/5 GHz Wi-Fi network is enabled, but no data is being
Solid on
transmitted wirelessly.
Blinking
The 2.4 GHz/5 GHz Wi-Fi network is enabled, and data is being
slowly (0.5s)
transmitted wirelessly.
Blinking
quickly
The ONT is performing or pending for WPS negotiation.
(0.25s)
Off
The 2.4 GHz/5 GHz Wi-Fi network is disabled.
Solid on
The ONT is registered with IMS, but no data is being transmitted.
Blinking
The ONT is registered with IMS, and data is being transmitted.
Off
The ONT is not registered with IMS.
HG7
5
Get to know your device

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pon ont hg9 xpon+easymeshPon ont hg7cPon ont hg7Pon ont hg6Pon ont hg1

Table of Contents