Connect The Router - Tenda RX12V1.0 Quick Installation Manual

Scenario 1: Set up the device as a router
Internet
Modem
LAN
Or
Ethernet jack
I. Connect the router
Tips
If you use the modem for internet access, power off the modem first before
connecting the WAN port of the router to the LAN port of your modem and
power it on after the connection.
01
Power source
PWR RST WPS/MESH WAN
WAN
Ethernet cable
Example: RX12 Pro
Tips
The product appearance may vary with models. Please refer to the product you
purchased.
1 2 IPTV/3
1, 2, IPTV/3
Ethernet cable
Power on the router.
Connect the WAN port of the router to the LAN port of your modem or
the Ethernet jack using an Ethernet cable.
Connect your wireless client such as a smartphone to the WiFi
network of the router, or use an Ethernet cable to connect the
computer to the 1, 2, IPTV/2 or IPTV/3 port of the router. The SSID
and password can be found on the bottom label of the device.
WiFi-enabled device
SSID:
MAC
Tenda_XXXXXX
Serial No.
Tenda_XXXXXX
SSID
Setting
Pin No. 12345678
Ten d a _ XXXXXX
Or
Wired device