Table of Contents
Advertisement
Port/Button
Description
Power jack.
POWER
Please use the included power adapter to connect the ONT to a power source.
Power on/off button.
ON/OFF
Press the button to turn on or off the ONT.
LED indicator on/off button.
LED
Press the button to turn on or off the LED indicators of the ONT.
WPS button.
Press the button to start the WPS negotiation process of the ONT. The WPS LED indicator
WPS
blinks. Within 2 minutes, enable the WPS function on a WPS-supported device to
establish a WPS connection.
Wi-Fi network button.
WLAN
Press the button to enable or disable the Wi-Fi network of the ONT.
Reset button.
After the ONT completes startup, use an object with a spike to hold down the button for
RESET
more than 10 seconds and then release it. All LED indicators light off in a few seconds.
When the POWER LED indicator lights solid on again, the ONT is restored to the
configurations preset by the ISP.
USB 2.0 port.
USB
Used to connect to a USB storage for resource sharing.
1.2.2
Label
The label is located on the bottom panel of the ONT. See the following figure for details.
Model: Model of the ONT
IP Address: Default IP address used to log in to the web UI of the ONT
Username & Password: Default user name and password used to log in to the web UI of the ONT
SSID & Key: Default Wi-Fi name and password of the ONT
GPON SN: GPON serial number of the ONT
MAC Address: MAC address of the ONT
9
Get to know your device
Advertisement
Table of Contents
