Tenda PON ONT HG9 User Manual page 105

Parameter description
Parameter
SNMP
System Description
System Contact
SystemName
System Location
System Object ID
Trap IP Address
Community name
(read-only)
Community name
(write-only)
Description
It specifies whether to enable the SNMP agent function.
It specifies a description of the ONT, which can be anything you like and is used for
identification.
It specifies the contact information of the ONT.
It specifies the name of ONT.
It specifies the place where the ONT is located.
It specifies the object ID of the ONT in the MIB, which can be used by the SNMP
manager to identify and manage the ONT.
It specifies the destination IP address of the SNMP trap. Make sure that the ONT and
the SNMP manager are reachable to each other.
They specify the community names which act as passwords for the interaction
between the SMNP manager and SNMP agent.
Community name (read-only): It is used to authenticate the Get request.
⚫
Community name (write-only): It is used to authenticate the Set request.
⚫
95
Advance