Table of Contents
Advertisement
◼
Ports & buttons
Port/Button
PON
PWR
TEL
LAN1/LAN2
WPS/RST
Description
Optical fiber port.
You can find it on the bottom of the ONT, which is used to connect to a fiber cord.
Power jack.
Please use the included power adapter to connect the ONT to a power source.
Telephone port.
Used to connect to a telephone for voice service using a telephone cable, which
needs to be prepared by yourself.
Gigabit LAN ports.
Used to connect to a router, switch, computer or IPTV set-top box.
WPS/Reset button.
WPS: Wi-Fi-enabled devices can connect to the Wi-Fi networks of the ONT
without entering the password through WPS negotiation.
Press the button for 1 to 3 seconds to start the WPS negotiation process of
the ONT. The 2.4G and 5G LED indicators blink quickly. Within 2 minutes,
enable the WPS function on a WPS-supported device to establish a WPS
connection.
Reset: Reset the ONT to factory settings.
After the ONT completes startup, press the button for more than 10 seconds
and release it. All LED indicators will light off in a few seconds. When the
PWR LED indicator lights solid on again, the ONT is restored to the
configurations preset by the ISP.
HG7
6
Get to know your device
Advertisement
Table of Contents
