Tenda PON ONT HG9 User Manual page 12

LED indicator Color
LOS Red
PON Green
PWR Green
◼
Ports & buttons
Jack/Port/Button
PWR
LAN
FIBER
RST
Status Description
No Ethernet device is connected or the Ethernet device is not
Off
connected to the LAN port properly.
The received optical power is lower than the optical receiver
Blinking
sensitivity, or no fiber cord is connected.
Off The received optical power is within the optical receiver sensitivity.
Solid on The ONT is registered successfully.
Blinking The registration is not completed (unregistered or registering).
The received optical power is lower than the optical receiver
Off
sensitivity, or no fiber cord is connected.
Solid on The ONT is powered on properly.
Off The ONT is powered off or not powered on properly.
Description
Power jack.
Please use the included power adapter to connect the ONT to a power source.
Gigabit LAN port.
Used to connect to a router, switch or computer.
SC/APC optical fiber port.
Used to connect to the optical network.
Reset button.
After the ONT completes startup, use an object with a spike to hold the button
down for more than 10 seconds and then release it. All LED indicators light off in a
few seconds. When the PWR LED indicator lights solid on again, the ONT is reset.
2
Get to know your device