Table of Contents
Advertisement
◼
Ports & buttons
Port/Button
Description
Power on/off button.
ON/OFF
Press the button to turn on or off the ONT.
Power jack.
PWR
Please use the included power adapter to connect the ONT to a power source.
SC/APC optical fiber port.
PON
You can find it on the bottom of the ONT, which is used to connect to a fiber cord.
USB 2.0 port.
USB
Used to connect to a USB storage device for resource sharing.
WPS button.
Press the button to start the WPS negotiation process of the ONT. The WPS LED indicator
WPS
blinks. Within 2 minutes, enable the WPS function on a WPS-supported device to establish a
WPS connection.
Wi-Fi network button.
WLAN
Press the button to enable or disable the Wi-Fi network of the ONT.
Telephone port.
TEL
Used to connect to a telephone for voice service.
One gigabit (LAN4) and three fast LAN ports.
LAN1/2/3/4
Used to connect to a router, switch, computer, or IPTV STB.
Reset button.
After the ONT completes startup, use an object with a spike to hold down the button for
RESET
more than 10 seconds and then release it. All LED indicators light off in a few seconds. When
the PWR LED indicator lights solid on again, the ONT is restored to the configurations preset
by the ISP.
LED indicator on/off button.
LED
Press the button to turn on or off the LED indicators of the ONT.
4
Get to know your device
Advertisement
Table of Contents
