Table of Contents
Advertisement
Parameter description
Parameter
MAC Filtering
Mode
Source MAC Address
Destination MAC
Address
Allow only specified devices to access the internet
Scenario: The Wi-Fi network at your home is misused by unknown users sometimes.
Goal: Only allow certain devices of family members to access the internet.
Solution: You can configure the MAC address filter function to reach the goal.
Assume that:
Device
Your own phone
Family member's phone 1
Family member's phone 2
Configuring procedure:
Step 1
Log in to the web UI of the ONT.
Step 2
Choose Services > Firewall > MAC Filtering.
Step 3
Set MAC Filtering to Enable, and click Apply Changes.
Step 4
Set Mode to Whitelist, and click Apply Changes.
Step 5
Enter 8CEC4BB30493 in the Source MAC Address field, and click Add.
Step 6
Repeat
Step 5
Description
It specifies whether to enable the MAC filtering function.
It specifies the mode of the MAC filtering function.
Whitelist: Only data packets whose source or destination MAC addresses are
⚫
added in the current filter table can access the internet.
Blacklist: Data packets from the LAN whose source or destination MAC addresses
⚫
are added in the current filter table cannot pass through the ONT.
They specify the source and destination MAC addresses of data packets.
You can only enter one source MAC address and destination MAC address in one
MAC filtering rule.
The MAC address cannot contain any special characters. An example in the correct
format is cc3a61711b6e.
MAC address
8C:EC:4B:B3:04:93
94:C6:91:29:C2:12
98:9C:57:19:D0:1B
to add the other two MAC addresses.
Status
Connected
Disconnected
Disconnected
68
Services
Advertisement
Table of Contents
