Tenda PON ONT HG9 User Manual page 13

HG6
◼
LED indicators
LED indicator Color
PWR Green
PON Green
LOS Red
LAN1/2/3/4 Green
TEL Green
WLAN Green
WPS Green
USB Green
Status Description
Solid on The ONT is powered on properly.
Off The ONT is powered off or not powered on properly.
Solid on The ONT is registered successfully.
Blinking The registration is not completed (unregistered or registering).
The received optical power is lower than the optical receiver
Off
sensitivity, or no fiber cord is connected.
The received optical power is lower than the optical receiver
Blinking
sensitivity, or no fiber cord is connected.
Off The received optical power is within the optical receiver sensitivity.
The LAN port is connected properly, but no data is being
Solid on
transmitted over the corresponding port.
The LAN port is connected properly, and data is being transmitted
Blinking
over the corresponding port.
No Ethernet device is connected or the Ethernet device is not
Off
connected to the LAN port properly.
The ONT is registered with the IMS (IP Multimedia Subsystem), but
Solid on
no data is being transmitted.
Blinking The ONT is registered with the IMS, and data is being transmitted.
Off The ONT is not registered with the IMS.
The Wi-Fi network is enabled, but no data is being transmitted
Solid on
wirelessly.
The Wi-Fi network is enabled, and data is being transmitted
Blinking
wirelessly.
Off The Wi-Fi network is disabled.
Solid on for
A WPS connection is established.
2 minutes
Blinking The ONT is performing WPS negotiation.
Off The ONT is not performing WPS negotiation.
The USB device is connected to the USB port properly, but no data
Solid on
is being transmitted over the port.
The USB device is connected to the USB port properly, and data is
Blinking
being transmitted over the port.
Off The USB port is disconnected or not connected properly.
3
Get to know your device