Table of Contents
Advertisement
Parameter
Description
You can click Multiple AP to create more wireless networks of the same band.
No.: It specifies the No. of the AP Wi-Fi network.
⚫
Enable: It specifies whether to enable the AP Wi-Fi network.
⚫
Band: It specifies the wireless band and protocol of the AP Wi-Fi network.
⚫
SSID: It specifies the Wi-Fi name of the AP Wi-Fi network.
⚫
Multiple AP
Broadcast SSID: It specifies whether to hide the SSID of the AP Wi-Fi network. Enabled
⚫
means that the SSID is displayed. Disabled means that the SSID is hidden, and you need
to enter the SSID of the Wi-Fi network manually to connect to it.
Active Client List: You can click it to view the information of clients connected to the
⚫
Wi-Fi network.
Reset: You can click it to discard the unsaved modifications on this page.
⚫
SSID
It specifies the Wi-Fi name of the main Wi-Fi network.
It specifies the bandwidth of the wireless channel of the Wi-Fi network. The following
values may vary with the ONT models. Please refer to the actual product for details.
20MHz: It indicates that the channel bandwidth used by the ONT is 20 MHz.
⚫
40MHz: It indicates that the channel bandwidth used by the ONT is 40 MHz.
⚫
20/40MHz: It specifies that the ONT can switch its channel bandwidth between 20 MHz
⚫
Channel Width
and 40 MHz based on the ambient environment.
80: It indicates that the channel bandwidth used by the ONT is 80 MHz. This option is
⚫
available only at 5 GHz.
20/40/80: It specifies that the ONT can switch its channel bandwidth among 20 MHz, 40
⚫
MHz, and 80 MHz based on the ambient environment. This option is available only at 5
GHz.
It specifies the channel in which the Wi-Fi network works.
You are recommended to choose a channel with less interference for better wireless
transmission efficiency. You can use a third-party tool to scan the Wi-Fi signals nearby to
understand the channel usage situations.
Auto: It indicates that the ONT automatically adjusts its operating channel according to
⚫
Channel Number
the ambient environment.
Auto (DFS): Dynamic Frequency Selection. With this function enabled, the ONT will
⚫
automatically detect the frequency of the radar system. When the ONT detects radar
signals in the same frequency with the ONT itself, the ONT will automatically switch to
another frequency to avoid interference with the radar system.
You can set the intensity of the radio power of the ONT. A higher radio power brings a
Radio Power (%)
wider coverage of Wi-Fi coverage.
22
WLAN
Advertisement
Table of Contents
