Table of Contents
Advertisement
Parameter description
Parameter
Description
Add Route
It is used to add a new static route rule.
Update
It is used to update your modification to an existing rule.
Delete Selected
It is used to delete the selected rule.
Show Routes
It is used to display the commonly used routes of the ONT.
Select
Select existing rules to update or delete them.
State
It specifies the status of a rule, including Enable and Disable.
Destination
It specifies the IP address of the destination network.
Subnet Mask
It specifies the subnet mask of the destination network.
It specifies the ingress IP address of the next hop route after the data packet exits from
Next Hop
the WAN interface of the ONT.
It specifies the priority of the routing rule. The smaller the number, the higher the
priority.
Metric
When the destination networks of two rules are the same, packets will be forwarded
according to the rule with smaller metric.
Interface
It specifies the interface of the ONT that the packet exits from.
Add a new static route rule
Step 1
Log in to the web UI of the ONT.
Step 2
Choose Advance > Advance > Routing.
Step 3
Select Enable as required.
Step 4
Set Destination, Subnet Mask, Next Hop, Metric, and Interface.
Step 5
Click Add Route.
91
Advance
Advertisement
Table of Contents
