Table of Contents
Advertisement
3 - Description
Filters
Filter s on your spraye r are there to protect the components and prevent nozzle blockage.
An Easy Clean suction filte r is fitted in the working zone.
A Cyclone pressure filter is fitted on the sprayer's right side just in front of the hose re el, hidden be hind the right front cover.
It has a built-in self-cleaning function.
In-line pressure filters can be fitted at each boom section.
Nozzle filters are fitted at each nozzle.
A coarse filte r is located below the top cove r for the main tank.
μ
ATTENTION! All filter s should always be in use and their function should be checke d regularly. Pay atte ntion to the
correct combination of filter and mesh size. For more, see the chapter " Technical Specifications" in this book.
μ
ATTENTION! Always run your sprayer with cleane d filters to ensure proper functions and to protect the interior of the
pump and valve s.
Easy Clean Filter
This filter collects impurities, when liquid is being sucked out of the main
tank by the main pump.
To ensure proper function of the filter and its built-in valve, the filter
must be ope ned at least once e ver y month. A label on the lid also
designates this.
Beside s the spray pressure gauge a clogging indicator is installed. This
wor ks as a vacuum gauge for the filter during operation - the pointer
moves from green towards red, if the filter star ts clogging.
Clogging indicator
Green area
Yellow area
Red area
46
Filter condition
70 - 100 % capacity.
No cleaning necessary.
55 - 70 % capacity
It is possible to finish an ongoing spray job
and then clean the filter afterwards.
0 - 55 % capacity
Clean the filter immediately, as it is clogged
too much for proper f unction.
Advertisement
Table of Contents
