Table of Contents
Advertisement
Ma intaining the engine dry air filter
±
Do not clean the filte r element (1) with petrol or hot liquids!
Renew damaged filter ele ments.
• Lift up the clamping yoke.
• Remove the filter hood and pull out the filter element
• Filter element
- blow out with dry compressed air (max. 5 bar) from the inside if
soiling is only slight
- renew if heavily soiled
Renewing the safety cartridge of the dry air filter
• Renew safety cartridge according to the inte rval in the maintenance schedule
• To do this:
- Unscrew hexagon nut, pull out safety cartr idge
- Inser t new safety cartridge, screw on hexagonal nut
• Insert filter element, mount hood and fix with clamping yoke
Clean the dust dis charge va lv e of the dry a ir filter
• Empty the dust discharge valve by pre ssing together the discharge
slit
• Remove any caked dust by pre ssing together the upper section of
the valve
• Clean the discharge slit
÷
The inte rvals of verification and cleaning can be reduced depending on the usage environment of the machine
÷
For more information, Refer to DEUTZ TCD 6.1 L6 manual in chapter «Suction System»
6 - Maintenance
2
1
50
1
151
Advertisement
Table of Contents
