Table of Contents
Advertisement
3 - Description
TurboFiller
The TurboFille r is where you add the chemicals to be mixed with water in the main tank.
Capacity: approximately 35 litres.
By oper ating the valves (A) on the side and valve (B) of the TurboFille r (C),
you can do the following:
• Stir up the added chemicals with wate r from the spraye r.
• Tr ansfer the mix to the main tank.
• Clean your chemical container or the TurboFiller inside by using
the flushing nozzle.
A spray gun (D) is also available for further cleaning.
TurboFiller S uc tion Valve
The valve is used simultaneously with the TurboFiller. The valve has 2
settings: Continuously open or spr ing-loaded normally closed.
Open the valve by lifting the leve r up, whe n chemicals are to be filled
into the TurboFiller and transferred to main tank.
TurboDeflec tor Valve
This Tur boDeflector valve activate s the vor tex flushing of the Tur boFiller.
Lift the lever to lock it in ope n position for continuous liquid rotation in
the hopper.
Rinsing of Chemical Conta iners
The upper lever is used for two purpose s.
1. When the TurboFiller lid is open:
For rinsing empty containers. Place the container over the rotating
flushing nozzle in the middle of the TurboFiller to rinse the inside
of the container.
2. When the TurboFiller lid is closed:
Use the lever to rinse the hopper, when the filling of chemicals is
completed.
€
DANGER! Do not activate this le ver, unle ss the multi-hole nozzle is covered by a container, as spr ay liquid may
other wise hit the operator! Risk of injur ies and spillage on the ground.
Rinse Tank
The rinsing tank is mounted in front of the main tank and made of
main tank and liquid system.
Filling is done at the top of the tank or via the 1'' threaded pipe socket in the working are
Capacity: approximately 600 litres.
48
polyethylene.
It is used for r insing and flushing of the
a.
B
A
C
D
Advertisement
Table of Contents
