Table of Contents
Advertisement
Spray Boom
Safety In fo
K eep the spray boom in folded position while driving outside the field. Park the sprayer and tractor on le vel ground before
using the folding/unfolding functions.
Failure to comply will damage the boom and cause dangerous situations to people and the surroundings.
€
DANGER! Before unfolding the boom it is important to connect the sprayer to the tractor ' s hitch point to prevent
overbalancing of the sprayer. Activate the tr actor's handbrake.
€
DANGER! When folding or unfolding the boom, make sure that no persons or objects are within the operating area
of the boom.
€
DANGER! Always follow the guideline s listed below when driving in areas with overhead powe r lines:
K eep from using the folding/unfolding functions in areas with over head
power lines. Unintended boom movements may cause contact with
ove rhead power lines, causing a r isk of fatal accidents.
μ
ATTENTION! A label (HARDI item no. 9784 48) follows the spr ayer.
This label must be placed in the cabin visible from the operator's
seat.
Operating the Grip
The buttons on the grip in the tractor controls the following sprayer functions in the field:
A. Status light for power ON/O FF.
The light must be ON.
B. Boom tilt up/down - left boom side.
Adjust the boom height individually for the right and left boom
side, if the terrain is hilly.
C. Boom tilt up/down - right boom side.
D. Boom slant - left boom side.
Adjust the boom height to match the slope, when driving across a
hillside.
E. Boom slant - right boom side.
F. Main valve for spraying ON/OFF.
Turn it ON for spraying, OFF to stop spraying.
G. Boom height up.
Aim for a he ight of 50 cm above the crop when spraying.
H. Boom height down.
I. Boom sections spraying ON/OFF.
Switch pushed up is O FF, down is ON.
J. Presets 1 and 2 for the T WIN air system - the selected air angle and air volume during spraying.
5 - Operation
115
Advertisement
Table of Contents
