Good Read: When To Indicate - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Good Read: When to Indicate

This feature specifies when the reader will provide indication (beep and/or flash
its green LED) upon successfully reading a bar code. Choices are:
•
•
•
NOTE
DEFAULT
$CBPIN01
Indicate Good Read = After Transmit
54
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then active
This option, which uses CTS, is only valid for Q21XX models with RS-232
interfaces.

$CBPIN00
Indicate Good Read = After Decode
$CBPIN02
Indicate Good Read = After CTS Goes Inactive, Then Active
Programming Reference Guide
LED and Beeper Indicators

