Code 11 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Code 11 Set Length 1

This feature specifies one of the bar code lengths for
on page
page 170
Length includes the bar code's check and data characters.
The length can be set from 2 to 50 characters, in increments of two. See
Length 1"
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
170. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
on page 257 for more detailed programming instructions.
$CC1L1
04 = Length 1 is 4 Characters
DEFAULT
Enter/Exit Programming Mode
Code 11 Length Control
Variable Length on
Fixed Length on page 170
~
CANCEL
Mode.
"Set
171