Codabar Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Codabar Set Length 1

This feature specifies one of the bar code lengths for
on page
page 159
Length includes the bar code's start, stop, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characters in increments of two. See
Length 1"
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
160
159. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
on page 257 for more detailed programming instructions.
$CCBL1
03 = Length 1 is 3 Characters
DEFAULT
Codabar Length Control
Variable Length on
Fixed Length on page 159
~
CANCEL
Programming Reference Guide
Codabar
Mode.
"Set