Code 93 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Code 93 Set Length 1

This feature specifies one of the bar code lengths for
on page
page 200
Length includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
for more detailed programming instructions.
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
200. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CC9L1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Code 93 Length Control
Variable Length on
Fixed Length on page 200
"Set Length 1"
~
CANCEL
Mode.
on page 257
201