Industrial 2 Of 5 Check Character Transmission; Industrial 2 Of 5 Length Control - HP Linear Barcode Scanner II Programming Reference Manual

Enter/Exit Programming Mode

Industrial 2 of 5 Check Character Transmission

Enables/disables transmission of an Industrial 2 of 5 check character.
$CU2CT01
Industrial 2 of 5 Check Character Transmission = Enable

Industrial 2 of 5 Length Control

This feature specifies either variable length decoding or fixed length decoding
for the Industrial 2 of 5 symbology.
Variable Length:
may be set.
Fixed Length:
DEFAULT
$CU2LC01
Industrial 2 of 5 = Fixed Length
184

For variable length decoding, a minimum and maximum length
For fixed length decoding, two different lengths may be set.

$CU2CT00
Industrial 2 of 5 Check Character Transmission = Disable
DEFAULT
$CU2LC00
Industrial 2 of 5 Length Control = Variable Length
Programming Reference Guide
Industrial 2 of 5

